Skip to main content

Inventory Settings

Inventory → Inventory Settings (/inventory/settings) is where your company decides how the inventory module behaves. It is one long page of numbered cards. The settings here are shared by everyone in the company — changing one changes it for every warehouse and every user, from the moment you save.

Do this page first. Several other pages read their defaults from it: the receiving form pre-selects the default warehouse and staging bin, a new item starts with the default unit and reorder levels, and the counts page decides whether counters can see the system quantity.

When to use this page​

  • You are setting up inventory for the first time.
  • You want new items to start with different defaults (unit, tracking, reorder levels).
  • You need to add a unit of measure (for example "box of 12") or a reason code for adjustments and write-offs.
  • You want the system to warn about, or refuse, movements that would leave an item below its safety stock.
  • You want to decide what people with no warehouse grant can see.

Before you begin​

You needWhy
inventory.settings.manageTo change most of the cards. The Warehouse Manager role has it.
inventory.access.manageTo change People without a warehouse grant. The Warehouse Manager role has it.
inventory.settings.financeTo change the three finance-owned settings: Allow negative stock, Default Purchase Tax Code and the Fiscal Year End. The Warehouse Manager role does not have it — the Accountant and System Administrator roles do.
At least one warehouseThe default warehouse and bins are chosen from your warehouses. Create them on Warehouses first if the dropdowns are empty.

A field you are not allowed to change is shown greyed out. Finance-owned fields also carry an orange note: "Finance controls this setting (needs the inventory finance permission)."

Understanding the page​

On a wide screen, an On this page list on the left jumps to each card. The version badge at the top right (for example v7) goes up by one every time anyone saves. A Locked badge means nobody can change anything until the lock is turned off — see Governance.

Cards 1 to 8 are one form, saved together with the Save Settings button in the bar at the bottom of the screen. The bar says "You have unsaved changes" until you save. Cards 9 to 11 are separate: the unit and reason lists save each entry on its own, and the last two cards are information only.

1. Stock Control​

SettingWhat it does
Allow negative stock (finance)When on, issues, deliveries, transfers and write-offs may take a bin below zero; the shortfall is costed at the current average until a receipt covers it. When off, those movements are refused if the bin does not hold enough.
Default WarehousePre-selected in the receiving, transfer and count forms.
Default Receiving / Staging BinPre-selected for new receiving lines — the area where deliveries land before they are put away.
Default Pick BinWhere deliveries pick from when an item has no stock anywhere. Normally a delivery proposes the bin of the earliest-expiring lot (for lot-tracked items), otherwise the bin holding the most stock.
People without a warehouse grantSee and work in every warehouse (the default), or See no warehouse until someone grants access. Grants are given per person on Warehouse Access.

If you change the default warehouse, any default bin that belongs to a different warehouse is cleared automatically, so you will need to pick the bins again.

2. Item Defaults​

The values a new item starts with. People can still change them on each item, and changing a default never touches items that already exist.

SettingWhat it does
Default Unit of MeasureThe unit a new item is stocked in, from the Units of Measure list in card 9.
Default ClassificationMerchandise, Raw materials, Work in process, Finished goods or Supplies. Decides how the item is grouped on the valuation report and the BIR inventory list.
Default Reorder PointAn item shows as low stock when its quantity falls to this level.
Default Reorder QuantityHow many to order when the item reaches its reorder point.
Default TrackingNone, Serial (each unit has its own number) or Lot (units are tracked by batch).
New items can be sold / New items can be purchasedWhether new items are offered on sales and purchasing documents.

3. Receiving & Purchasing​

SettingWhat it does
Block over-receiptsWhen on, a receipt that takes a purchase order line past its ordered quantity (plus the tolerance) is refused. When off, extra units go into stock and the order simply counts as fully received.
Over-receipt Tolerance (%)Only editable while blocking is on. 10% on an order of 100 allows up to 110 to be received. Must be 0–100.
Default Purchase Tax Code (finance)The tax code put on requisition, order and bill lines when neither the line nor the item names one. Suppliers marked not VAT-registered always get Non-VAT instead.

4. Counts & Adjustments​

SettingWhat it does
Blind counts by defaultNew physical counts hide the system quantity from counters until the count is submitted, so people count what is really on the shelf instead of confirming a number. Each count can still opt out.
Require a reason on stock adjustmentsWhen on, setting a bin to a new quantity by hand must name one of the adjustment reasons from card 9.

One rule here cannot be switched off: the person who approves a count can never be the person who submitted it.

5. Safety Stock Checks​

Safety stock is the quantity you always want to keep in reserve in a warehouse. This card decides what happens when an action would leave an item below that level. "Available" stock already subtracts what approved sales orders still have to ship.

You choose a behaviour separately for six actions:

ActionWhen the check runs
Approving a sales orderWhen an order is approved — the moment the goods are promised.
Posting a deliveryWhen the goods leave. The order being shipped does not count against itself.
Customer portal ordersWhen a customer places an order on the portal.
Sending a transferWhen stock is sent to another warehouse. Moves between bins of the same warehouse are not checked.
Stock-outs and adjustments downWhen stock is taken out by hand on the stock transaction form or the Scan Station.
Issuing to productionWhen a production order consumes its components.

Each one can be set to:

  • Don't check — no check.
  • Warn, and let the user go ahead — the person sees a warning and can confirm to continue.
  • Refuse — the action is stopped.
note

A refused action can still be pushed through by someone who holds the safety stock override permission. The Warehouse Manager role does not hold it; the System Administrator role does. Counts and write-offs are never checked, because they record what is already true.

6. Customer Portal​

SettingWhat it does
Portal orders ship fromThe warehouse portal orders ship from, and the one the portal catalog checks when it shows In stock, Low or Out. Leave it on The default warehouse to use card 1's choice.
Approve portal orders automaticallyWhen on, a portal order's sales order is approved as soon as it is placed (unless the sales order safety stock check refuses it). When off, someone who approves sales orders must do it before the order can ship.
Keep safety stock back from the portalWhen on, the catalog shows an item as out of stock once what is available is down to its safety stock. Customers never see quantities either way.

7. Period Close (finance)​

The Fiscal Year End month and day. The inventory period ending on this date is the annual one, and closing it adds the BIR inventory list to the period's report pack. February 29 is not allowed.

8. Governance & Change History​

  • Configuration Version — read only; goes up on every save.
  • Approved By — free text recording who signed off on this configuration, for example "Operations Manager".
  • Lock these settings against further edits — while on, every change is refused and an orange banner explains why. To make changes, turn the lock off, save, then make your changes and save again.
  • Change Log — once anything has been saved, a list shows each changed field, its old and new value, who changed it and when.

9. Units & Reason Codes​

Four lists that feed the dropdowns elsewhere in inventory, one tab each:

TabUsed for
Units of MeasureThe units items can be stocked in (pcs, box, kg…).
Adjustment ReasonsWhy a stock quantity was corrected by hand.
Write-off ReasonsWhy stock was written off, or why a count found less than expected.
Write-down ReasonsWhy stock was written down to a lower value (used by finance).

The grid shows each value's Code, Label, Sort Order, Status (Active or Inactive) and In Use — how many records use it.

Costing is read only. Every company uses the moving weighted average cost, with unit costs kept to 4 decimal places and values to 2. "Moving average" means each receipt blends its cost into the item's average, and every issue goes out at that average.

Related Settings links to settings that live elsewhere: Accounting Settings (perpetual or periodic accounting and the inventory accounts — owned by finance), Profit Analysis, and Warehouses.

Change a setting​

  1. Open Inventory → Inventory Settings.
  2. Use On this page (or scroll) to find the card.
  3. Change the value. The bottom bar switches to "You have unsaved changes".
  4. Select Save Settings.

You see "Inventory settings saved" and the version badge goes up by one. The new value applies to everything done from now on; it does not rewrite past transactions.

Add a unit of measure or reason code​

  1. Scroll to Units & Reason Codes and pick the tab — for example Units of Measure.
  2. Select Add Value. A drawer opens.
  3. Fill in:
    • Code — the short identifier stored on records, for example box12. Required, up to 30 characters. It cannot be changed later, because stock records keep it.
    • Label — what people see in dropdowns, for example "Box of 12". Required. You can rename it at any time.
    • Sort Order — lower numbers appear first in dropdowns.
    • Active — leave on so it appears in dropdowns.
  4. Select Create Unit of Measure (the button names whichever list you are on).

To rename or hide a value, open its row menu and choose Edit. To retire a value that has been used, switch Active off rather than deleting it.

warning

A value with a number in In Use cannot be deleted — the delete is refused, and the confirmation dialog warns you before you try. Deactivate it instead: it disappears from new entries while old records keep it.

Common issues​

ProblemWhat to check
The whole form is greyed outThe settings are Locked. Ask whoever locked them (see Approved By) before turning the lock off.
Allow negative stock, tax code or fiscal year end are greyed outThese belong to finance. Ask someone with the Accountant role.
People without a warehouse grant is greyed outYou need inventory.access.manage.
A default bin cleared itselfYou changed the default warehouse and the bin belonged to a different one. Pick a bin in the new warehouse.
"That month does not have this many days"The fiscal year end day is past the end of the chosen month.
Save Settings is disabledNothing has changed since the last save.