Skip to main content

Scan Station

Inventory → Scan Station (/inventory/scan) is a fast, one-item-at-a-time screen for people on the warehouse floor. Scan an item, choose what is happening to it, enter the quantity, and record — then scan the next one. It works with a USB or Bluetooth handheld barcode scanner, or with the camera on a phone or tablet.

It records exactly the same movements as the New Stock Transaction form and the Transfers page. It is just quicker when you have a scanner in your hand.

When to use this page​

  • Issuing parts at a counter all day.
  • Recording small receipts or found stock as they happen.
  • Putting stock away from one bin to another.
  • Correcting a shelf quantity while standing at the shelf.

Before you begin​

  • inventory.stock.manage opens the page. TRANSFER also needs inventory.transfers.manage; without it the button is disabled with "Transfer permission required." The Warehouse Manager role has both.
  • Items need barcodes that match their SKU — print them from the Item Catalog.
  • You need Entry access to the warehouses you will record in.

Setting up a handheld scanner​

Most handheld scanners act like a keyboard ("keyboard wedge" mode) and type the barcode followed by Enter. Plug the scanner in, open the Scan Station, and scan — no setup is needed in the application. Do not click into a text field first; the page listens for the scan while it shows "Scan a barcode to begin".

Record a movement​

  1. Open Inventory → Scan Station. The page shows "Scan a barcode to begin".
  2. Scan the item with your handheld scanner, or select Camera and point your device's camera at the barcode.
  3. The item card appears with its name, SKU, total stock and tracking type. If you see Item not found, no active item has that SKU — select Try Again.
  4. Choose the Transaction Type:
    • IN — add stock to a bin.
    • OUT — take stock out of a bin (the default).
    • ADJUSTMENT — set the bin to the quantity you enter.
    • TRANSFER — move stock from one bin to another.
  5. Enter the Quantity (the cursor is already there).
  6. Choose the Location — or, for a transfer, the From and To bins.
  7. Fill in Serial No. or Lot No. if the item is serial- or lot-tracked, and a Reason for an adjustment (required if your settings say so).
  8. Add Notes if useful, then select Record.

You see a short confirmation such as "OUT recorded — BRK-PAD-001 ×2", and the page returns to "Scan a barcode to begin" ready for the next item. Select Cancel at any point to abandon the current item.

The Recent Scans (this session) list at the bottom shows your last ten movements with the item, bin, type and time — handy for checking what you just did. It clears when you leave the page; the permanent record is in Transactions.

tip

The Scan Station remembers the type you picked between scans, so a run of issues only needs the item, quantity and bin each time. It does not remember the quantity — it resets to 1.

Common issues​

ProblemWhat to check
Scanning does nothingThe page only listens while it shows "Scan a barcode to begin". Finish or Cancel the current item first. Check the scanner is in keyboard mode and sends Enter after the code.
Item not foundThe barcode must equal the item's SKU, and the item must be Active.
Record stays disabledA bin is missing, the quantity is below 1, or the transfer's From and To bins are the same.
"Pick a reason for this adjustment."Your settings require a reason on adjustments.
"Transaction failed"Read the description: usually not enough stock in the bin, no Entry access to the warehouse, or a safety stock refusal.
The camera does not openThe browser needs camera permission, and the site must be opened over HTTPS.